|
|
New Evolution
Carpet Wand |
|
 |
|
1st rotationally molded wand that is half the
weight and delivers twice the performance over
traditional stainless steel wands! |
| |
|
|
|
| Browse Our Full
Product Lines: |
|
|
|
|
|
|
|
|
|
|
|
If you can't find what
you are looking for,
CONTACT US. We are here to help. |
|
 |
 |
|
| |
Cobra® Series
Heated Carpet Extractors |
|
|
COBRA-300-H
The COBRA® 300-H offers the power of 300 psi and
212°F instant heat at the wand tip the
combination of high heat and pressure
dramatically improves cleaning effectiveness.
The internal heat exchanger heats the solution
after the pump prolonging pump life. It also
maintains the solution at 212°F consistently
throughout the job increasing cleaning
performance. Select 300 or 75 psi for carpet,
fabric and upholstery cleaning. The COBRA® 300-H
offers solid state circuitry, including the
patented circuit locator to prevent blown
circuits. Its low moisture system helps carpets
dry faster by not flooding the carpet with
solution. Its compact design, 9 gallon
solution/recovery tank capacity and light weight
make the COBRA® 300-H easy to maneuver and
transport. The tanks are rotationally molded for
long life and carry a lifetime warranty. |
 |
|
 |
|
|
|
COBRA-H & H1
The COBRA® H & H1 provide exceptional value in
hot water extractors. At 100 psi and 212°F
instant heat, the COBRA® H & H1 can tackle the
toughest cleaning jobs on carpet or upholstery.
Both units feature an internal heat exchanger to
maintain 212°F cleaning solution at the wand tip
for superior cleaning. The low moisture system
improves carpet drying times. The COBRA® H
features dual two-stage vacuums with a patented
manifold system, this unit supplies 150” of
waterlift while also prolonging vacuum motor
life. The COBRA® H1 features a three-stage
vacuum with 140” of waterlift. Both units are
lightweight and have 9 gallon solution and
recovery tanks. |
 |
|
Return to
top of page |
NEW COBRA-H2 & H3
-
Watch the Video
COBRA-H2 & H3 provide exceptional value in hot
water extractors. At 100 or 150 psi and 212° F
instant heat, the COBRA-H2 & H3 can tackle the
toughest cleaning jobs on carpet or upholstery.
Both units feature an internal heat exchanger to
maintain 212° F cleaning solution at the wand
tip for superior cleaning. The low moisture
system improves carpet drying times. New upright
and light-weight design makes the COBRA-H2 & H3
very easy to maneuver and the compact size takes
up limited storage space. The Cobra H2 & H3
offer longer run times with 10 gallon solution
and recovery tanks. |
 |
|
Return to
top of page |
COBRA
The COBRA® & COBRA-C1 are 100 psi non-heated models
offering excellent performance in a compact
design. The COBRA® C features dual two-stage
vacuums with a patented manifold system which
prolongs the vacuum motor life and develops 150”
of waterlift. The COBRA® C1 features a
three-stage vacuum with the same patented
manifold system and develops 140” of waterlift.
This coupled with low moisture systems help
carpets dry faster. The body on both units are
rotationally molded and will not rust, crack or
dent. The COBRA® C & C1 offer 9 gallon solution
and recovery capacity and weigh only 69 lbs. |
|
|
|
Exclusive
Features from U.S. Products:
Return to
top of page |
| Heater
Element: |
In-line, after the pump
for longer life and instant heat to
212°F, lifetime warranty. |
| Smart
Circuit Locator: |
Automatically locates
separate lines to eliminate blown
circuits. |
| Low
Moisture System: |
Less water (combined
with higher heat) means faster drying,
less chance of shrinkage, and less
wicking from the pad. |
| Tanks &
Bodies: |
Lightweight,
rotationally molded with a lifetime
warranty against cracks, leaks and
dents. |
| Solid
State Circuitry: |
Senses temperature
change in heat exchanger within 1 degree
for more consistent heat at the wand
tip. |
| Vacuum
Manifold: |
Increases efficiency
when using two vacuum motors in series. |
|
 |
 |
|
|
